oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl60.0m-10c 60.0 mhz if saw filter 10.60 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl60.0m-10c january 2011 rev a 60.0 mhz if saw filter 10.60 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1 = 220nh, c1=4pf output l2 = 220nh source/load impedance 50 ?
oscilent part number 813-sl60.0m-10c january 2011 rev a 60.0 mhz if saw filter 10.60 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -10 - 75 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 60.00 - insertion loss at fo db - 12.00 15.00 group delay variation at fo 4.32 mhz nsec - 32 50 absolute delay at fo usec - 1.10 - passband ripple variation at fo 4.32 mhz db - 0.30 0.70 bandwidth at -1db mhz 10.00 10.60 - bandwidth at -3db mhz - 11.32 - bandwidth at -30db mhz - 13.48 13.80 bandwidth at -40db mhz - 13.83 - ultimate rejection db 40 45 - temperature coefficient ppm/c - -86 -
oscilent part number 813-sl60.0m-10c january 2011 rev a 60.0 mhz if saw filter 10.60 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?30 db bandwidth at -40 db
oscilent part number 813-sl60.0m-10c january 2011 rev a 60.0 mhz if saw filter 10.60 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo4.32mhz group delay variation fo4.32mhz smith chart
oscilent part number 813-sl60.0m-10c january 2011 rev a 60.0 mhz if saw filter 10.60 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|